Unit Reset - Lindy aJ-Orion User Manual

5.6.4 Unit Reset

This section allows you to reset specific parts of the device. This involves the keyboard and
mouse, the video engine and the IP KVM SWITCH CLASSIC USB itself.
Resetting the unit itself is mainly needed to activate a newly updated firmware. It will close all
current connections to the administration console and to the Remote Console.
The whole process will take about half a minute. Resetting sub devices (e.g. the video engine)
will take a few seconds only and does not result in connections closing. To reset individual IP
KVM SWITCH CLASSIC USB functionality, click on the Reset button.
Note: Only the super user is allowed to reset the IP KVM SWITCH CLASSIC USB .
52