Lindy aJ-Orion User Manual page 49

sure you configure your console computer accordingly. For instance, on Windows based
operating systems you can configure a dial-up network connection, which defaults to the right
settings like PPP.
The Modem Settings panel allows you to configure remote access to the IP KVM SWITCH
CLASSIC USB using a modem. The meaning of each parameter will be described below. The
modem settings are part of the serial settings panel.
Serial line speed
The speed the IP KVM SWITCH CLASSIC USB is communicating with the modem. Most
modems available today will support the default value of 115200 bps. In case you are using
an old modem and discovering problems try to lower this speed.
Modem Init String
The initialization string used by the IP KVM SWITCH CLASSIC USB to initialize the modem.
The default value will work with all modern standard modems directly connected to a
telephone line. In case you have a special modem or the modem is connected to a local
telephone switch that requires a special dial sequence in order to establish a connection to
the public telephone network, you can change this setting by entering a new string. Refer to
your modem's manual about the AT command syntax.
Modem server IP address
This IP address will be assigned to the IP KVM SWITCH CLASSIC USB during the PPP
handshake. Since it is a point-to-point IP connection virtually every IP address is possible
but you must make sure, it is not interfering with the IP settings of the IP KVM SWITCH
CLASSIC USB and your console computer. The default value will work in most cases.
Modem client IP address
This IP address will be assigned to your console computer during the PPP handshake.
Since it is a point-to-point IP connection virtually every IP address is possible but you must
make sure, it is not interfering with the IP settings of the IP KVM SWITCH CLASSIC USB
switch and your console computer. The default value will work in most cases.
Pass-through access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and access it
(assuming it provides terminal support) via Telnet. Select the appropriate options for the serial
port and use the Telnet Console, or a standard Telnet client to connect to the IP KVM SWITCH
CLASSIC USB .
45