Outgoing Calls - Aastra DT390 User Manual

7
7.1
1424-EN/LZT 103 087 Uen G 2014-04-14

Outgoing Calls

This chapter describes how to make calls, how to conceal your number
from being displayed to the person you are calling, and how to redial the
last external number dialed.
Calling
To make a call, you can either select a contact in one of the phonebooks
available, or get the phone number or extension from the call list. You
can also use shortcuts, if available.
• Available phonebooks are the local phonebook stored on the
phone and the company phonebook stored centrally on a server,
see Contacts on page 49.
• The 25 last received phone numbers are stored in the call list along
with the latest dialed and missed phone numbers, see Call List on
page 47.
If the number you wish to dial is not stored in any phonebook, nor found
in the call list, you enter the desired phone number or extension with the
keypad.
To call a number that is not stored in the call list or among your contacts,
do the following:
1. Dial the number and press
The number is shown on the display while dialing.
2. If needed, press Clear to erase and edit the number.
Use the navigation key to step and add or delete a digit in the
middle of a number.
Note: If you receive a queue tone when the digit(s) to get an external
line are dialed (if the feature Least Cost Routing is used in the
system), keep waiting. Once a line becomes free you will receive
a dial tone. If a warning tone is heard, the selected line is marked
Expensive.
An international number can be dialled from the handset by entering a +
character followed by the country code and local number. To enter the +
character, long press the 0 key until the character is shown in the
display.
Note: The + character cannot be entered and international numbers
cannot de dialled in the following circumstances:
or Call.
O C
UTGOING ALLS
36