Download  Print this page

Something Not Working - Electrolux Gas Hob Instruction Manual

Hide thumbs

Advertisement

Something not working

Some operating problems may be solved with simple maintenance operations or and
without the intervention of Technical Assistance.
PROBLEM
THE HOB
DOES NOT
WORK.
A BURNER
DOES NOT
WORK.
IT TAKES TOO LONG
TO FINISH THE
DISHES / THEY
ARE COOKED TOO FAST.
CAUSE
! There are blown fuses in the
domestic electrical system.
Switches are turned off or
there is no power at the
power outlet.
! The hob is not activated.
! The main gas supply tap is
closed.
! The gas bottle is empty.
! The hob has overheated and
a safety device has been set
on the four burners.
! The Child Safety function
has been inadvertently
activated.
! The safety device has been
set on the burner due to
repeated ignition failures.
The flame level indicators
and the residual heat
indicator flash.
! The pan support or the
burner cap and crown were
not correctly positioned
after cleaning.
!The burner crown holes are
obstructed.
! The defect persists.
! The flame level adjustment
is not appropriate.
!
SOLUTION
!Have the fuses replaced.
!Reset the switches.
!Touch the main ON/OFF
Control
.
!Open the tap.
!Purchase a new bottle.
!Allow the top to cool (see
par. "Protection against
overheating").
! Deactivate the Child
Safety function (see par.
"Child Safety Function").
!
Wait 60 seconds, then
follow the instructions
given in chapter: "In case
of ignition failure".
! Check
the
position (see par. "In case
of ignition
failure").
!
Follow the instructions
given in the section
"Cleaning
maintenance".
! Contact an authorized
technical
assistance
centre.
!See the section "How to
light a burner"
correct
and
61

Hide quick links:

Advertisement

loading

  Also See for Electrolux Gas Hob

  Related Manuals for Electrolux Gas Hob