How to turn off a
1. To turn off a burner press the relevant
Burner Ignition Touch Control
flame level indicators go off.
The residual heat indicator remains on
until the pan support and the burner have
In case of ignition
The hob ignition device generates a series
of small sparks for about 6 seconds.
If the flame does not light during this period,
the gas flow to the burner is interrupted.
After 3 seconds, the ignition device
automatically repeats the ignition procedure
for another 6 seconds.
After three failed ignition attempts, a safety
device is set on the burner. The flame level
Caution! When the safety device is
set on a burner, the burner controls
cannot be operated for about 60
After 60 seconds, you can remove the safety
device on the burner by touching both the
at the same time.
Then, follow the instructions given in the
paragraph "How to light a burner".
Caution! Check that the burner cap
and crown are correctly positioned
If the ignition problem persists, refer
chapter "Something not working".
Never use a manual spark gas-lighter
if the burner ignition device does not
work correctly. If necessary, use a
. All the
and the Decreasing
Burner pan support