Polycom 1800 Hardware Manual page 13

RealPresence Collaboration Server (RMX) 1800 Hardware Guide
2 Connect the media and signaling cable to LAN 2 port.
To power up the system for the first time:
1 For first entry installation, you must insert the USB key containing the modified IP addresses in USB
slot on the system's back panel. For more information see, the system's Getting Started Guide,
"Procedure 1: First-time Power-up".
2 Turn ON the power by pressing on the ON/OFF button located on the front panel of the
RealPresence Collaboration Server 1800.
You are required to register all Polycom Software Licenses that you have purchased when retrieving
the Activation Key. For example, Encryption and Network Separation each have different Polycom
Software Licenses.
The parameters in the lan.cfg file are uploaded from the USB key to the system's memory and applied
during the power-up sequence.
System power-up sequence may take up to five minutes.
When the system's configuration is completed (including the Management and IP Network Services),
and if there are no System Errors, the STATUS LED (on the system's front panel) turns green.
3 Remove the USB key. For more information see, the Getting Started Guide, "Hardware
Description".
Polycom, Inc. 10