Connecting Devices With Remote Control Connectors; Performing Operations By Rc On This Unit Without Visual Contact; Remotely Connecting Marantz Devices; Connecting The Power Cord - Marantz PM-14S1 Owner's Manual

ENGLISH

Connecting devices with remote control connectors

Connecting the power cord

Wait until all connections have been completed before connecting the power cord.

Performing operations by RC on this unit without visual contact

You can connect an external IR receiver to the REMOTE CONTROL connectors to perform
operations on this unit with the supplied remote control unit without visual contact. This might
be necessary if the unit is hidden in a cupboard or corner, so you can't directly point with the
remote control unit to the device.
IR receiver
RC OUT
To household power

Remotely connecting Marantz devices

outlet
(AC 230 V, 50/60 Hz)
Power cord
You can transmit remote control signals simply by connecting a Marantz audio device to the
(supplied)
REMOTE CONTROL IN/OUT connectors using the remote connection cable provided with the
device.
Set the remote control switch located on the rear panel of the connected audio component to
"EXTERNAL" to use this feature.
15