Connection For 5.1 Multi-Channel Playback - Marantz PM-14S1 Owner's Manual

ENGLISH

Connection for 5.1 multi-channel playback

The three units are connected using F.C.B.S. For the F.C.B.S connection, prepare 3 audio connection cables, and refer to F.C.B.S. ( vpage 10).
Connect the outputs of players that have 5.1 channel analog outputs to each of the three units.
If using an active subwoofer, see the owner's manual that came with the subwoofer for further instructions.
Set the ID numbers for the three amplifiers as explained in How to set ID number for F.C.B.S. (vpage 18).
• When the ID 1 unit is operated, ID 2 and ID 3 units will operate in sync.
• Set SPEAKER button on front panel in ON
position.
• Set to "STEREO".
For front L/R speakers
Set PM-14S1 to ID 1.
R channel front L channel front
speaker speaker
12
Super Audio CD multi-channel player, etc.
• Set SPEAKER button on front panel in ON position.
• Set to "STEREO".
For center speaker or
subwoofer
Set PM-14S1 to ID 2.
To power
outlet.
To line input
jack
Active
subwoofer
MULTI CHANNEL AUDIO OUT
FRONT R FRONT L SURROUND R SURROUND L SUB-WOOFER CENTER
To power
outlet.
Front center
speaker
F.C.B.S. connection
: Signal flow
• Set SPEAKER button on front panel in ON
position.
• Set to "STEREO".
For surround speakers
Set PM-14S1 to ID 3.
To power
outlet.
R channel L channel
surround surround
speaker speaker