ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Welcome Before You Begin Thank you for choosing a Marantz amplifier. This guide What’s In the Box provides step-by-step instructions for setting up your Quick Start Power cord amplifier. Guide Owner’s Remote control...
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Setup Install batteries in the remote control unit There are fi ve steps to the setup process. Install batteries in the remote control unit Connect the speakers to the amplifi er Connect the CD player to the amplifi er Plug the power cord into a power outlet Begin CD playback Batteries...
Page 4
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connect the speakers to the amplifi er Connecting the speaker cables q Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or apply solder to it.
Page 5
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Connect the CD player to the amplifi er CD player • This unit has both unbalanced and balanced connectors. The features of the balanced connectors are little effect of external noise and little shaking in the connector area. For details, see the included owner’s manual.
Page 6
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Plug the power cord into a power outlet Connect to household power outlet Power cord (supplied) (AC 230 V, 50/60 Hz)
Page 7
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Begin CD playback Press the power operation button. Set the input source to “CD”. “CD” is displayed on the display of this unit. Play the CD player. Adjust the volume.
Need help?
Do you have a question about the PM-10 and is the answer not in the manual?
Questions and answers