ENGLISH
Tips
Tips
n I want to adjust the tone myself
• You can adjust the tone as desired using the BASS and TREBLE knobs and the balance
adjustment function (vpage 17).
n I want to adjust the attenuation level when muting sound
• The attenuation level can be set at -20 dB, -40 dB, or -∞ (vpage 17).
n I want to use this unit as a power amplifier
• Turn the power amp direct mode on (vpage 18).
n I want to use this unit as a pre-amplifier
• Connect the power amplifier to the PRE OUT connectors of this unit (vpage 14).
n I want to turn the illumination lamps on both sides of the unit
main panel off
• Turn the illumination lamp setting off (vpage 19).
n I want to use two or more of these units for high quality
playback
• Use the stereo complete bi-amp connections (vpage 11).
• Use the multi-channel playback connections (vpage 12).
n I want to use this unit's remote control to operate a Marantz
CD player
• Switch the remote control control mode to CD.
• Also refer to the CD player Owner's Manual.
20
Troubleshooting
n Are the connections correct?
n Is the unit being operated as described in the owner's manual?
n Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. If the problem
persist there may be a malfunction.
In that case, disconnect the power immediately and contact your retail outlet.
Contents
No sound comes out ············································································································· (22)
Error messages ····················································································································· (23)