Marantz PM-14S1 Specifications

PM-14S1
Integrated amplifier
Reference Series - Integrated Amplifer
The PM-14S1 integrated amplifier delivers superb sound quality and operational versatility, and features exclusive Marantz technologies
such as our HDAM (Hyper Dynamic Amplifier Module) discrete circuitry and current feedback topology. Featuring a massive power supply
with a high current toroidal power transformer wound with Oxygen Free Copper secondaries that is rated at 650 VA along with high speed
high current Schottky Barrier Diodes in the rectifer circuit, the PM-14S1 is rated at 90 watts per channel into 8 ohms and 140 watts per
channel into 4 ohms (both from 20Hz - 20kHz). A total of 24 HDAM units are employed throughout the amplifier, including the line level
stage, phono equalizer stage and the power amplifier stages. The power amplifiers feature separated circuitry and dual massive heat sinks
along with multiple discrete high current power transistors to deliver wide dynamic range and stability even with lower impedance speaker
loads. The elegant remote control can also control the matching SA-14S1 Super Audio CD/CD player, and there's a power amp direct input
that allows the PM-14S1 to be used as a standalone power amplifier for even more system configuration versatility.
Marantz Audio Advantage
Current Feedback technology provides
n
wide range, very fast and accurate signal
handling.
Marantz proprietary HDAM SA2 and
n
SA3 modules and discrete audio circuitry
Full discrete power amplifier with V/I Servo
n
(90W 8 ohms 20Hz - 20kHz, 140W 4 ohms
20Hz - 20kHz)
Robust, high-speed power supply with
n
blocking capacitors and large-capacity
Schottky Barrier Diodes
Constant Current Feedback (C.C.FB)
n
MM/MC phono equalizer
Newly designed Marantz original high
n
quality / high-purity copper speaker
terminals (SPKT-100)
High quality sound
Rigid mechanical construction
n
for anti-vibration
Rigid chassis together with double layered
n
bottom plate, aluminum die-cast chassis feet
Oxygen Free Copper toroidal transformer
n
Low noise LCD display
n
Total sound balance re-tuned with
n
optimized components
Useful functions
System remote unit controls both
n
PM-14S1 amplifier and SA-14S1
Super Audio CD/CD player
Linear Volume Control with new volume
n
control IC
Floating Control Bus System (F .C.B.S) for
n
bi-amp, multichannel configuration
Power amp direct input
n
Auto standby, low power consumption
n
in standby mode (0.2W)