Touchpad Module - HP Envy Maintenance And Service Manual

14
Table of Contents

Advertisement

TouchPad module

Description
TouchPad (includes cable)
Before removing the TouchPad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
5.
Remove the battery (see
6.
Remove the fan (see
7.
Remove the card reader board (see
8.
Remove the system board (see
9.
Remove the keyboard (see
Remove the TouchPad:
1.
Remove the 2 Phillips PM20×30 screws (1) that secure the TouchPad to the computer .
2.
Remove the 2 Mylar screw insulators (2).
3.
Lift the TouchPad up at an angle (3).
72
Chapter 4 Removal and replacement procedures
Service cover on page
Battery on page
39),
Fan on page
55).
Card reader board on page
System board on page
Keyboard on page
37).
54).
57).
68).
Spare part number
727540-001

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy 14 sleekbook

Table of Contents