Right Speaker - HP Envy Maintenance And Service Manual

Right speaker

Description
Speaker Kit (includes left speaker/subwoofer and right speaker)
The computer includes two separate speakers — a speaker on the right side, and a speaker/subwoofer
on the left side. You must remove the system board to remove the right speaker. You do not have to
remove the system board to remove the left speaker/subwoofer. You do have to remove the RJ-45
module cover to remove the left speaker/subwoofer.
Before removing the front speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
5. Remove the battery (see
6. Remove the fan (see
7.
Remove the card reader board (see
8.
Remove the system board (see
Remove the speakers:
1. Remove the Phillips PM2.5×3.5 screw (1) and the Phillips PM2.5×5.5 screw (2) that secures the
right hinge to the computer.
66 Chapter 4 Removal and replacement procedures
Service cover on page
Battery on page 39),
Fan on page 55).
Card reader board on page
System board on page
37).
54).
57).
Spare part number
727513-001