Touchpad Module - HP 245 G7 Maintenance And Service Manual

TouchPad module

Table 5-12 Spare part description and number
Description
TouchPad module
TouchPad module cable
Before removing the TouchPad module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
To remove the TouchPad module:
1. Peel the conductive tape off the keyboard (1).
2. Starting in the corner, use a plastic, non-marking tool to pry up the TouchPad module to disengage the
adhesive that secures it to the top cover (2).
3. Working around each edge, pry the TouchPad module loose, and then remove it from the computer (3).
NOTE:
Reverse this procedure to install the TouchPad module.
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
The TouchPad module may be very tight and difficult to remove.
(Preparation for disassembly on page
27).
29).
Spare part number
L22586-001
L23184-001
26).