Touchpad Module - HP 14-ck0 Series Maintenance And Service Manual

TouchPad module

Description
TouchPad module
TouchPad module cable
Before removing the TouchPad module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the TouchPad module:
1. Starting in the corner, use a plastic, non-marking tool to pry up the TouchPad module to disengage the
adhesive that secures it to the top cover (1)
2. Working around each edge, pry the TouchPad module loose, and then remove it from the computer (2).
NOTE:
Reverse this procedure to install the TouchPad module.
Bottom cover on page
Battery on page
The TouchPad module may be very tight and difficult to remove.
29).
31).
Component replacement procedures
Spare part number
L22586-001
L23184-001
47