Rtc Battery - HP Envy Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
5. Disconnect the battery cable (see
6. Remove the WWAN module (see
Remove the RTC battery:
1. Disconnect the RTC battery cable from the system board (1).
2. Lift the battery to disengage the adhesive that secures it to the system board (2).
Reverse this procedure to install the RTC battery on computer models.
48 Chapter 4 Removal and replacement procedures
Service cover on page 37).
Battery on page 39).
WWAN module on page
Spare part number
725458-001
45).