Restoring Factory Settings In Setup Utility; Exiting Setup Utility; Updating The Bios; Determining The Bios Version - HP Envy Maintenance And Service Manual

14
Table of Contents

Advertisement

Restoring factory settings in Setup Utility

NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Setup Utility to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
f10
3.
Use the arrow keys to select Exit > Load Setup Defaults.
4.
Follow the on-screen instructions.
5.
To save your changes and exit, press f10, and then follow the on-screen instructions.
or
Use the arrow keys to select Exit > Exit Saving Changes, and then press enter.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory
settings.

Exiting Setup Utility

To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press
arrow keys to select Exit > Exit Saving Changes, and then press enter.
To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press
arrow keys to select Exit > Exit Discarding Changes, and then press enter.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed
on the computer, you need to know the version of the system BIOS currently installed.
to enter Setup Utility.
esc
while the Press the ESC key for Startup Menu
esc
to return to the menu display. Then use the
esc
to return to the menu display. Then use the
Using Setup Utility
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy 14 sleekbook

Table of Contents