Touchpad module
Table 6-12
Touchpad module description and part number
Description
Touchpad module
Touchpad module cable
Before removing the touchpad module, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the optical drive (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
To remove the touchpad module:
1.
Disconnect the cable from the ZIF connector on the touchpad (1).
2.
Lift the tape from the touchpad (2).
3.
Lift the tape up to gain access to the touchpad (3).
4.
Starting in the corner, use a plastic, nonmarking tool to pry up the touchpad module to disengage the
adhesive that secures it to the top cover (1)
(Preparation for disassembly on page
Optical drive (select products only) on page
Bottom cover on page
Battery on page
31).
25).
26).
29).
Component replacement procedures
Spare part number
L22586-001
L22525-001
45