Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP Envy Maintenance And Service Manual

4 Removal and replacement
procedures
CAUTION:
providers should perform the removal and replacement procedures described here. Accessing the
internal part could damage the computer or void the warranty.

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.

Cables and connectors

CAUTION:
during the reassembly process. Improper cable placement can damage the computer.
32 Chapter 4 Removal and replacement procedures
This computer does not have user-replaceable parts. Only HP authorized service
Using excessive force during disassembly and reassembly can damage plastic parts. Use
When servicing the computer, be sure that cables are placed in their proper locations