Touchpad Module - HP 15 Series Maintenance And Service Manual

TouchPad module

Table 6-11 TouchPad module part descriptions and part numbers
Description
TouchPad module
TouchPad module cable
TouchPad button board cable
Before removing the TouchPad module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the TouchPad module:
1. Disconnect the TouchPad cable from the ZIF connector on the TouchPad (1) and the TouchPad button
board cable from the ZIF connector on the system board (2).
2. Peel the tape off the TouchPad (1).
3. Starting in the corner, use a plastic, non-marking tool to pry up the TouchPad module to disengage the
adhesive that secures it to the top cover (2)
54 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 41).
34).
38).
Spare part number
L20449-001
L20450-001
L20451-001
33).