Touchpad Module - HP 17 Series Maintenance And Service Manual

TouchPad module

Table 6-12 TouchPad module and cable descriptions and part numbers
Description
TouchPad module
TouchPad module cable
Before removing the TouchPad module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the TouchPad module:
1. Disconnect the cable from the ZIF connector on the TouchPad (1).
2. Lift the tape from the TouchPad (2).
3. Lift the tape up to gain access to the TouchPad (3).
4. Starting in the corner, use a plastic, non-marking tool to pry up the TouchPad module to disengage the
adhesive that secures it to the top cover (1)
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 40).
33).
37).
Component replacement procedures
Spare part number
L28085-001
L22525-001
32).
53