Hard Drive - HP Envy Maintenance And Service Manual

Hard drive

Description
1-TB, 5400 rpm, 2.5 in
1-TB, 5400 rpm, 2.5 in, hybrid (8-GB integrated flash memory)
750-GB, 5400 rpm, 2.5 in
750-GB, 5400 rpm, 2.5 in, hybrid (8-GB integrated flash memory)
500-GB, 5400 rpm, 7 mm
500-GB, 5400 rpm, 7 mm, hybrid (8-GB integrated flash memory)
Hard Drive Hardware Kit (includes left and right brackets, hard drive cable, and screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
5.
Disconnect the battery cable (see
Remove the hard drive:
1. Remove the 4 Phillips PM2.5×3.5 screws (1) that secure the hard drive to the computer.
2. Lift the hard drive enough to gain access to the hard drive connector cable (2)
42 Chapter 4 Removal and replacement procedures
Service cover on page 37).
Battery on page 39).
Spare part number
676521-001
731999-001
634250-001
732001-001
683802-001
732000-001
741683-001