HP Envy Maintenance And Service Manual page 85

9. If you need to replace the webcam module, disconnect the webcam cable (1), and then lift to
disengage the adhesive that secures the webcam (2) to the display enclosure.
The webcam module is available using spare part number 725465-001.
10. If you need to remove the raw display panel, remove the 4 Phillips PM2.0×3.0 screws (1) that
secure the panel to the display enclosure, and then rotate the panel upward (2) to gain access to
the display cable connection on the back .
Raw display panels are available using the following spare part numbers:
727509-001: HD BrightView
●
727510-001: HD AntiGlare
●
727511-001: QHD BrightView
●
Component replacement procedures
77