Edit One-To-One Nat (Network Address Translation) - Billion BiPAC 7402GL R4 User Manual

Edit One-to-One NAT (Network Address Translation)

One-to-One NAT maps a specific private / local IP address to a global / public IP address.
If you have multiple public / WAN IP addresses from your ISP, you are eligible to use these IP
addresses in One-to-One NAT .
Go to Configuration > Virtual Server > Edit One-to-one NAT
NAT Type: Select the desired NAT type. One-to-One NAT function is set to Disabled by default.
Global IP Address:
Subnet: The subnet of the public/WAN IP address given by your ISP. If your ISP has pro-
vided this information, you may insert it here. Otherwise, use IP Range method.
IP Range: The IP address range of your public/WAN IP addresses. For example, IP:
1.1.1.1, end IP: 1.1.1.10
Select the Apply button to apply your changes.
Check to create a new One-to-One NAT rule:
95