192
Section 10: Management and Configuration
Using FTP for Print Server Management
Editing the config file
Having assigned an IP address to your AXIS 5570e/AXIS 5670e, as
described in Setting the IP address, on page 24, you can change the
AXIS 5570e/AXIS 5670e parameter settings using the File Transport
Protocol (FTP).
Follow the instructions below to edit the config file using FTP:
1. Log in to the AXIS 5570e/AXIS 5670e by typing:
ftp <host name>
(Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and
.)
pass
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the AXIS 5570e/AXIS 5670e by typing:
put config CONFIG
Notes:
•
It is important that the destination file is specified in capital letters.
Otherwise the edits are temporary and will be lost once the AXIS
5570e/AXIS 5670e has been powered off.
•
To edit the config file from a Macintosh you will need FTP support such as
MacTCP, Fetch or Anarchie. The procedure for editing the file is the same as
described above.
The example on the next page describes how to edit the config file
using FTP from a DOS window.
AXIS 5570e/AXIS 5670e User's Manual
or
ftp <IP address>
in a DOS window
root