Axis 5570e User Manual page 94

94
Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User's Manual
Device Statement
JUNIT
MODE
PM
WC
Explanation
Specifies:
1. The device address (host-connected, channel-attached, non-SNA printers only). Do not specify a device
address for the AXIS 5570e/AXIS 5670e when using TCP/IP attachment.
2. The name of the processor to which the device is attached
3. A destination class for messages about the device
4 .Whether the device is initially online or offline
This parameter is required.
Specifies that the printer is managed by an FSS. This parameter is required.
Specifies which data-set processing mode is supported. For the AXIS 5570e/AXIS 5670e attached to Postscript
printers, the correct setting is
PRMODE=(LINE,PAGE,)
data sets can be printed.
Specifies the print output class that the printer is to process. You may want to consider handling disabled
mechanisms by defining print classes.
, indicating that composed-page and line