Print Server Management Using Ftp - Axis 1650 User Manual

AXIS 1650 User's Manual

Print Server Management Using FTP

Having assigned an IP address to your AXIS 1650, as described in 2. Set the IP Address, on page
13, you can change the AXIS 1650 parameter settings using the File Transport Protocol (FTP).
config
Editing the file
Follow the instructions below to edit the config file using FTP:
1. Log in to the AXIS 1650 by typing:
ftp <host name> or ftp <IP address> in a Command prompt.
2. Enter the user id, the default entry is
it must also be entered).
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the AXIS 1650 by typing:
put config CONFIG
It is important that the destination file is specified in capital letters. Otherwise the edits are
temporary and will be lost once the AXIS 1650 has been rebooted.
Print Server Management and Configuration
(if the default password has been changed then
root
51