Ipds Overview; Section 18 Ipds Overview; Ipds Parameter Settings; Ipds System Languages - Axis 5570e User Manual

268
Section 18: IPDS Overview
Section 18

IPDS Parameter Settings

IPDS System Languages

IPDS Overview

This section describes:
• IPDS parameter settings
• IPDS fonts
Before printing IPDS data streams, the basic parameters should be
set. This is done from the AXIS 5570e/AXIS 5670e web pages under
IBM Emulators | Detailed view (IBM IPDS Emulator Settings) where
you can configure the common parameters of the IPDS emulator and
IBM Emulators | Detailed view (SCS/IPDS Emulator Configurations)
where you can configure the settings for each session.
The AXIS 5570e/AXIS 5670e must be set up for the System Language
of your IBM system configuration in order to obtain the correct
characters in each specific language. This is done from the IBM
Emulators | Detailed view (SCS/IPDS Emulator Configurations) page.
The default selection is US English (Code Page 37).
The following table describes the valid IPDS system languages:
AXIS 5570e/AXIS 5670e User's Manual