Dbcs Support; Configuring The As/400 Host, 5494 Cu Mode; Section 19 Dbcs Support - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual
Section 19
Important!

Configuring the AS/400 Host, 5494 CU mode

DBCS Support

The AXIS 5570e/AXIS 5670e supports Double-Byte Character Set
(DBCS) for SNA and TN5250E printing. This facilitates printing from
an IBM AS/400 host system for languages employing double-byte
character sets.
The following Chinese, Japanese and Korean DBCS tables are used in
the AXIS 5570e/AXIS 5670e:
Country
Korea (KS)
Korea (KSSM)
Japan
China
AXIS 5570e/AXIS 5670e Double-byte Character Tables
The AXIS 5570e/AXIS 5670e supports SNA DBCS printing in IBM 5494
emulation only.
Follow the instructions below to configure the AS/400 Host for DBCS
support:
1. Type WRKSYSVAL on the AS/400 command line and press Enter.
2. Check that the DBCS version installed indicator (QIGC) sysval is
set to 1 (on).
3. Check that the QIGCCDEFNT sysval is set to a DBCS font installed
in the system.
4. Proceed with the steps detailed in The AS/400 Host System
Checklist, on page 37.
Section 19: DBCS Support
Printer Emulation
5x27_002_TX_KS
5x27_002_TX_KSSM
5x27_001_TX
5x27_005_TX
Character Table
KS
KSSM
Shift - JIS
GB
279