Using Telnet - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual

Using Telnet

Viewing
the Account File
Section 10: Management and Configuration
Having assigned an IP address to your AXIS 5570e/AXIS 5670e, as
described in Setting the IP address, on page 24, you can manage your
AXIS 5570e/AXIS 5670e using the Telnet protocol.
The account file contains data concerning the last ten print jobs. It
specifies an internal job number, the user that initiated the job, the
protocol and logical printer that was used, current status (Completed,
Off-line, or Printing), number of bytes printed, elapsed time and off-
line time.
Follow the instructions below to view the account file using telnet:
1. Log in to the AXIS 5570e/AXIS 5670e by typing:
telnet <host name>
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and .)
pass
3. View the account file by typing:
account
The example on the next page shows how to view the account file
using Telnet from a UNIX shell.
or
telnet <IP address>
195
in a DOS
root