Adding Printers In Windows 98 And Me Over Netbios/Netbeui Using Axis Print Monitor - Axis 5570e User Manual

AXIS 5570e/AXIS 5670e User's Manual
Adding Printers in Windows 98 and Me over NetBIOS/NetBEUI using AXIS Print
Monitor
Note:
Follow the procedures below to install Axis NetBIOS/NetBEUI printer
ports on a Windows 98 workstation, using AXIS Print Monitor:
1. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon.
2. After clicking Next in the first dialog, the Wizard asks you to select
Local printer or Network printer. Select Local printer. Click Next.
3. Choose the appropriate printer driver for your printer. If the desired
printer driver appears in the displayed Manufacturers and Printers
lists, highlight your selection, click Next and proceed directly to
step 6. It is only necessary to perform steps 4 - 5 if your printer does
not appear in the model list.
Even if the desired printer is available in the Manufacturers and Printers lists,
you are advised to use the printer driver provided with the printer. This assures
you of the latest driver software.
4. Click the Have Disk... button. Insert the printer driver diskette/CD
that was provided with your printer, select the appropriate
diskette/CD drive and click OK.
5. Select the printer driver you want to install and click Next.
Section 6: Setting Up - Windows
121