Using Ftp For Print Server Management - Axis 27979R1 User Manual

Management and Configuration
Managing
Print Servers
Changing the IP
Settings
If Your Print Server is
not Shown in the List
Upgrading
Axis Servers
Multiple
Configuration and
Installation

Using FTP for Print Server Management

92
Follow the instructions below to access the AXIS 5550 using AXIS
ThinWizard:
1. Click Manage Network in the main menu.
2. Select the network group, including the, from the drop-down list. All AXIS
servers included in the network group appear in the window.
3. Click the link of the AXIS 5550 to access its internal Web page.
4. The 'Srv' and 'Dev' columns show the status of your print servers and printers.
Using AXIS ThinWizard you can also set or change each print server's IP
parameters.
1. Click IP Settings in the main menu.
2. Select print server in the list.
3. Enter your data: IP address, Subnet mask, Default gateway and the print
server's password (default password is pass).
4. Click Set to save your settings.
5. Click Rescan to update AXIS ThinWizard and see the changes.
If your print server is not shown in the list, click "Click here...". By
entering the serial number of the print server (found on the underside
label) you will be able to set the print server's IP parameters.
Example: 00408c181cf0
Refer to "Upgrading using AXIS ThinWizard" on page 83, for more
information about upgrading Axis servers using AXIS ThinWizard.
Using AXIS ThinWizard it possible to change the settings of several Axis
servers simultaneously. It is also possible to copy the configuration from
one server to another. This is a convenient way to install a new server,
based on the settings of an already existing server.
For additional information, please refer to the AXIS ThinWizard online
help.
Having assigned an IP address to your Axis Network Print Server, as
described in "Assigning an IP Address to the Print Server" on page 14,
you can change the Axis Network Print Server parameter settings using
the File Transport Protocol (FTP).
Ensure that FTP Enabled is set to yes. To check this parameter, browse to
the print server and select Admin | Network Settings | Detailed View |
TCP/IP Network.
AXIS 5550 User's Manual