Axis 5570e User Manual page 198

198
Section 10: Management and Configuration
Telnet Help
Follow the instructions below to perform a hexdump printout for the
SNA printing protocol:
1. Log in to the AXIS 5570e/AXIS 5670e by typing:
telnet <host name>
windows (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and .)
pass
3. Enable the AXIS 5570e/AXIS 5670e to hexdump mode by typing:
snahexdump
4. Select Start Logging from the Terminal menu in the Telnet
window. Specify a file name and select the folder where you
want to save the file.
5. Start the print job.
6. When the print job is finished, select Stop Logging from the
Terminal menu.
7. Enter the quit command
Replace the command in step 3 above with
TN3270E and TN5250E protocols,
protocol, or
rtnhexdump
By typing in step 3 in any of the Telnet instruction sets above, a
help
list of all available commands will be displayed.
AXIS 5570e/AXIS 5670e User's Manual
or
telnet <IP address>
tnehexdump
lpdhexdump
for the reverse Telnet protocol.
in a DOS
root
for the
for the LPR/LPD