Using Ftp For Print Server Management - Axis USB User Manual

Using FTP for Print Server Management

Editing the config File
Notes:
AXIS OfficeBasic USB User's Manual
Having assigned an IP address to your AXIS OfficeBasic USB, as
described earlier in this manual, you can change its parameter settings
using the File Transport Protocol (FTP).
Follow the instructions below to edit the config file using FTP:
1. Log in to the AXIS OfficeBasic USB by typing:
ftp <host name>
- or -
ftp <IP address>
in a Windows Command window.
2. Enter user id and password. (The default entries are
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the AXIS OfficeBasic USB by typing
put config CONFIG
• It is important that the destination file is specified in capital letters. Otherwise the edits
are temporary and will be lost once the AXIS OfficeBasic USB has been powered down.
• To edit the config file on a older MacOS verions (pre-MacOSX) you will need FTP support
such as MacTCP, Fetch or Anarchie. The procedure for editing the file is the same as
described above.
The example on the next page shows how to edit the config file using FTP
from a Command window.
Print Server Management Methods
and
root pass
.)
39