Installing The Switch Housing - Casablanca AURORA Owner's Manual

A
URORA
CONNECTING THE SWITCH HOUSING MODULE
Step 12. For 3-Speed models only,
hold the switch housing up to the fan
and connect the motor plug to the
switch housing socket. The connec-
tor is keyed to ensure correct
installation.
Note: Do not force the connectors,
check that they are orientated so the
keying will match!
Note: Versa•Touch models
will have only a wire nut
capping the black and white
wires coming out of the fan
motor, and there is no
reverse switch or pull chain
on the switch housing.
Step 13. Locate the
9
three (3) 5-32 X / "
32
screws provided.
Step 14. Line up the
three threaded holes in
the rim of the switch
housing with the three
clearance holes in the
switch housing mount.
Carefully slide the switch
housing into the mount
so that the threaded
holes are directly behind
the clearance holes.
Step 15. Install the
9
three (3) 5-32 X / "
32
screws provided.
Tighten securely by hand
only.
SWITCH HOUSING
MOUNT SCREW
9
5-32 X / " (3)
32
PROCEED TO YOUR FAN'S CONTROL FEATURE SECTION FOR INSTALLATION/OPERATING INSTRUCTIONS:
8
™
COMPLETING INSTALLATION
MOTOR
CONNECTOR
(PLUG)

INSTALLING THE SWITCH HOUSING

3•SPEED = PAGE 9 VERSA•TOUCH = PAGE 11
SWITCH
HOUSING
CONNECTOR
(SOCKET)