The Sip Account Screen; Add/Edit Sip Account - ZyXEL Communications FMG3024-D10A Series User Manual

Chapter 18 VoIP
Table 58 VoIP > SIP > SIP Service Provider (continued)
LABEL
Do Not Disturb
Disable
Apply
Cancel

18.3 The SIP Account Screen

The Device uses a SIP account to make outgoing VoIP calls and check if an incoming call's
destination number matches your SIP account's SIP number. In order to make or receive a VoIP
call, you need to enable and configure a SIP account, and map it to a phone port. The SIP account
contains information that allows your Device to connect to your VoIP service provider.
See Section 18.3 on page 188
To access the following screen, click VoIP > SIP > SIP Account.
Figure 94 VoIP > SIP > SIP Account
The following table describes the labels in this screen.
Table 59 VoIP > SIP > SIP Account
LABEL
#
Active
SIP Account
SIP Service
Provider
Account No.
Modify

18.3.1 Add/Edit SIP Account

You can configure a new SIP account or edit one. To access this screen, click Add new SIP
Account in the SIP Account screen or Edit icon next to an existing account.
188
DESCRIPTION
This code is used to turn the Do Not Disturb feature off.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for how to map a SIP account to a phone port.
DESCRIPTION
This is the index number of the entry.
This shows whether the SIP account is activated or not.
A yellow bulb signifies that this SIP account is activated. A gray bulb signifies
that this SIP account is activated.
This shows the name of the SIP account.
This shows the name of the SIP service provider.
This shows the SIP number.
Click the Edit icon to configure the SIP account.
Click the Delete icon to delete this SIP account from the Device.
FMG3024-D10A / FMG3025-D10A Series User's Guide