ZyXEL Communications FMG3024-D10A Series User Manual page 236

Chapter 30 Auto Provision
The following table describes the fields in this screen.
Table 84 Maintenance > Auto Provision
LABEL
Auto Provision
Directory
Auto Provision
Server
Server Port
Retry Count
Retry Timer
Expire Timer
Apply
236
DESCRIPTION
Enable or disable auto provision.
Enter the directory path where the auto provision file is located.
Enter the IP address of the auto provision server.
Enter the port number used by the auto provision server.
Enter the number of times to retry auto provisioning.
Enter the number of seconds to wait before retrying the auto provisioning attempt.
Enter the number of seconds to wait before downloading the configuration file
again, if the configuration file from the server is the same as the configuration file
on the device, thereby retrying the download until an updated configuration file is
downloaded.
Click Apply to save your changes.
FMG3024-D10A / FMG3025-D10A Series User's Guide