Ipsec Vpn: Add - ZyXEL Communications FMG3024-D10A Series User Manual

Chapter 17 VPN
This screen contains the following fields:
Table 50 IPSec VPN
LABEL
Add New Tunnel
#
Active
Tunnel Name
Local Address
Remote Address
IPSec Algorithm
Modify

17.2.2 IPSec VPN: Add

Use these settings to add or edit VPN policies. Click Security > VPN > Add New Tunnel to open
this screen as shown next.
168
DESCRIPTION
Click this button to add an item to the list.
This is the VPN policy index number.
This displays if the VPN policy is enabled.
The name of the VPN connection.
This displays the IP address of the Device.
This displays the IP address of the remote IPSec router.
This displays the encryption algorithm for the VPN connection.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
FMG3024-D10A / FMG3025-D10A Series User's Guide