Add/Edit File Sharing - ZyXEL Communications FMG3024-D10A Series User Manual

Each field is described in the following table.
Table 16 Network Setting > Home Networking > File Sharing
LABEL
Server Configuration
File Sharing
Services (SMB)
Add new share
#
Status
Share Name
Share Path
Share Description
Modify
Apply
Cancel

7.5.2 Add/Edit File Sharing

Use this screen to set up a new share or edit an existing share on the Device. Click Add new share
in the File Sharing screen or click the Edit icon next to an existing share.
Figure 31 File Sharing: Add/Edit
Each field is described in the following table.
Table 17 File Sharing: Add/Edit
LABEL
Volume
Share Path
Description
Apply
Back
FMG3024-D10A / FMG3025-D10A Series User's Guide
DESCRIPTION
Select Enable to activate file sharing through the Device.
Click this to set up a new share on the Device.
Select the check box to make the share available to the network. Otherwise,
clear this.
This shows whether or not the share is available for sharing.
This field displays the share name on the Device.
This field displays the path for the share directories (folders) on the Device.
These are the directories (folders) on your USB storage device.
This field displays information about the share.
Click the Edit icon to change the settings of an existing share.
Click the Delete icon to delete this share in the list.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Select the volume in the USB storage device that you want to add as a share in
the Device.
This field is read-only when you are editing the share.
Manually enter the file path for the share, or click the Browse button and select
the folder that you want to add as a share.
This field is read-only when you are editing the share.
You can either enter a short description of the share, or leave this field blank.
Click Apply to save your changes.
Click Back to return to the previous screen.
Chapter 7 Home Networking
101