Bridge Mode - ZyXEL Communications FMG3024-D10A Series User Manual

Chapter 5 Broadband
Table 7 Broadband Add/Edit: Routing - IPoE (continued)
LABEL
Prefix length
IPv6 Default
Gateway
IPv6 DNS Server
Obtain IPv6 DNS
info Automatically
Use the following
Static DNS IPv6
Address
Primary IPv6
DNS Server
Secondary IPv6
DNS Server
6to4 Tunneling
6RD Enable
6to4 Tunneling
Relay Server IP
4 to 6 Tunnel
Enable DS-Lite
4to6 Endpoint
IPv6 Address
Apply
Back

5.2.1.3 Bridge Mode

Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select Bridge as the encapsulation mode.
80
DESCRIPTION
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Enter the IPv6 address of the default outgoing gateway using a colon (:)
hexadecimal notation.
Select whether you want to obtain the IPv6 DNS server addresses
automatically or configure them manually.
Select this to have the Device get the IPv6 DNS server addresses from the ISP
automatically.
Select this to have the Device use the DNS server addresses you configure
manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
The 6 to 4 Tunnel fields display when you set the IPv6/IPv4 Mode field to
IPv4 Only.
Select 6to4 if the Device is connected to a network that has both IPv6 and IPv4
and the IPv4 addresses are public IP addresses. In this mode, the Device can
convert an IPv4 address directly to an IPv6 address. The format is:
2002:[IPv4 address in hexadecimal]::/48
Select this option to enable IPv6 Rapid Deployment. By enabling this function,
the Device uses an ISP's IPv6 address prefix instead of the 2002::/48 prefix.
The operational domain of 6RD is limited to and controlled by the ISP's
network. 6RD hosts are ensured to be reachable from all native IPv6 addresses
as 6RD only uses relay servers within control of the ISP.
Enter the tunneling relay server's IPv4 address in this field.
The 4 to 6 Tunnel fields display when you set the IPv6/IPv4 Mode field to
IPv6 Only. Enable Dual Stack Lite to let local computers use IPv4 through an
ISP's IPv6 network.
Enable Dual Stack Lite to let local computers use IPv4 through an ISP's IPv6
network.
Specify the transition router's IPv6 address.
Click Apply to save your changes.
Click Back to return to the previous screen.
FMG3024-D10A / FMG3025-D10A Series User's Guide