Table of Contents
Advertisement
Date/Time
The date/time must be reset in the event of a power cut or if the base has
been disconnected. However, the date/time will be retained if the batteries are
discharged.
In some countries, time and date are updated automatically when a call is
received, while in other countries this must be done manually.
This setting only needs to be programmed on one of the handsets.
1. Press Menu.
2. Scroll using
3. Scroll using
4. Enter the date (MM/DD). Press OK.
5. Enter the time (HH MM). Press OK to save.
Recall button timing
In normal domestic use, this setting should not require changing and is preset to
100 ms. The recall timing may need adjustment in some advanced PBX systems.
1. Press Menu.
2. Scroll using
3. Scroll using
4. Select the required setting using
www.doro.com
Settings
/
to Settings. Press OK.
{
}
/
to Date/Time. Press OK.
{
}
/
to Settings. Press OK.
{
}
/
to Flash Time. Press OK.
{
}
. Press OK to save.
/
{
}
English
29
Advertisement
Table of Contents
