Table of Contents
Advertisement
Network services
Most usual operator/extra services can be accessed via the menu or with the menu
buttons during a call. Some functions are pre-programmed but is not certain that all
functions will work on delivery as this will depend on the country of installation/
operator. You can change the codes that are sent, see Other Settings.
Please note!
You may have to pay extra for some services, contact your service provider for more information. Some services
will not work unless you have contacted your service provider to activate them.
Via the menu
1. Press Menu. Scroll to Net Services. Press OK.
2. Scroll to required service.
-
Withhold No Withhold your number from recipient. The code for
this service must be programmed manually, see Other Settings.
Call Divert Incoming calls are always diverted to another number.
-
Call Waiting Function off/on. This is a practical function for
-
avoiding problems with temporary modem connections.
-
Wake up Enter the time when you wish to receive your wake up alarm call. HH:MM.
3. Press OK. Follow the instructions on the handset/display.
4. Press
to terminate call.
L
During a call/On-line Menu
1. Connect an external call. Press Menu. Scroll to desired service (e.g.):
-
Insert Pause May be required when dialling via PBX exchange.
-
Mute to enable/disable the microphone.
-
Make 2nd Call Dial a second number, e.g. to use in a conference or three-way call (=R).
-
Ringback When the number is free you will hear a quick ring signal (=
-
Phonebook To search the phonebook.
-
INT Call Call another handset (+1...).
Tone Temporary change to tone dialling.
-
Notebook Store a number temporarily in the redial memory.
-
Reject Call Reject an incoming call (=R
-
End Current Toggle between calls/End current call (=R
-
Toggle Toggle between calls/Answer incoming waiting call (=R
-
Conference Conference/Three-way call (=R
-
2. Press OK.
Date/Time/Alarm
1. Press Menu. Scroll to Date/Time. Press OK.
2. Scroll to required setting. Press OK.
Alarm Clock
Date/Time
English
An activated alarm is indicated in standby mode by
. When the alarm goes off, an audio signal is heard for 60 seconds.
Press any key on the handset to turn off. The volume is determined
by the set ring signal level. If the symbol is not illuminated in standby
mode, the reason may be that the clock is not set.
Setting of date/time is described in Connection.
).
0
).
1
).
3
).
5
).
2
Advertisement
Table of Contents
