Table of Contents
Advertisement
Hands free function
1. Dial the required telephone number. Mistakes can be erased
using ß .
2. Press . The Hands free function will be activated and the telephone
number will now be dialled. The conversation can then be heard through the
loudspeaker.
3. Place the handset on a hard flat surface, e.g. a table.
4. Speak towards the microphone on the lower front edge of the handset (max
1 metre away).
5. The speaker volume may be adjusted during the call using
to save your setting.
6. To switch to normal handset conversation press .
7. Press
to terminate the call.
q
Please note!
In hands free speaker mode it is only possible for one person at a time to talk. The switchover
between speaker and microphone is automatic and dependent on the sound level of the incoming
call and the microphone respectively. It is therefore essential that there are no loud noises in the
immediate vicinity of the telephone, as this will disrupt the speaker function.
Paging
Pressing
on the base unit will activate the paging signal on the handset. This
j
function is used to help locate the handset or to page the person carrying the
handset. The signal will stop automatically after a while or if the
on the handset is pressed. The page can also be cancelled by pressing
base unit again.
www.doro.com
Operation
English
/
. Press OK .
{
}
button
q
on the
j
11
Advertisement
Table of Contents
