Table of Contents
Advertisement
Hands Free function
The hands free button
calls to be made without having to hold the handset. If you wish you can switch
between handset and hands free during a call.
1. Press
, the hands free function will be activated (
, the hands free function will be activated (
s
s
s
and dial tone will be heard through the speaker.
2. Dial the required telephone number.
3. Place the handset on a hard fl at surface, e.g. a table, shelf or similar, with the
display facing up.
4. Speak towards the microphone on the lower front edge of the handset (max
1 metre away).
5. The volume may be adjusted during a call using
6. To switch to normal handset conversation press
7. To switch back to hands free press
8. Press
to terminate the call.
to terminate the call.
q
q
q
Please note!
Please remember that in hands free speaker mode, it is only possible for one person at a time to
talk. The switchover between speaker and microphone is automatic and dependent on the sound
level of the incoming call and the microphone respectively.
It is therefore essential that there are no loud noises in the immediate vicinity of the telephone,
as this will disrupt the speaker function.
www.doro.com
Operation
is located on the front of the handset, this allows
s
s
will be displayed)
s
/
.
{
}
}
}
.
s
again.
English
11
Advertisement
Table of Contents
