Registration; Base Selection; Registering A New Handset; Deleting Another Handset - Doro 565 COLOUR Manual

English

Base selection

Only applicable in systems with more than one base unit.
1. Press Menu.
2. Scroll to Registration using
3. Scroll to Select Base using
4. Select a base unit (1 - 4) using

Registering a new handset

Each new handset must be registered in order to use the current base unit, each
base unit can handle up to 5 handsets.
On registration the handset is allocated a handset number for use on the new base
unit.
For further information please refer to Expanded System.
1. Press and hold
remain active for one minute.
2. Press Menu.
3. Scroll to Registration using
4. Scroll to Register using
5. Scroll to the base unit you wish to register ( *
6. When the handset has located a base unit an ID code is displayed. Press Ok.
7. When PIN is displayed enter the base unit's PIN code(0000 by default). Press Ok.
8. If registration is successful the handset will return to standby mode in a few
seconds.

Deleting another handset

Any additional handset to the base unit can easily be deleted
1. Press Menu.
2. Scroll to Registration using
3. Scroll to De-register using
4. Enter the base unit PIN code (0000 by default). Press Ok.
5. Select the required handset by pressing the corresponding digit
handset keypad.
6. Press Ok to confirm.
30

Registration

∧
/
∧
/
∧
/
on the base unit until it beeps twice. Registration mode will
j
∧
/
∧ ∨
/ . Press Ok.
∧
/
∧ ∨
/
∨
. Press Select.
∨
. Press Ok.
∨
. Press Ok to confirm.
∨
. Press Select.
engaged) using
=
∨
. Press Select.
. Press Ok.
∧ ∨
/ . Press Ok.
- on the
1 5
www.doro.com