English
Registering a new handset
To enable the use of more than one handset a registration has to be performed.
Every new handset must be registered in order to use the current base unit, each
base unit can handle up to 5 handsets.
On registration the handset is allocated a handset number for use on the new
base unit, the handset numbers are 1-5.
Additional handsets can be purchased from your local retailer. Please refer to
the Expanded Systems chapter for more information.
1. Press and hold
mode will remain active for approximately 90 seconds.
2. Press
.
w
3. Scroll
/
{
}
4. Select the base unit you wish to register with by pressing the corresponding
number button
5. Enter the current PIN number (0000 when supplied). Press
6. If the registration is successful the handset will return to standby mode in a
few seconds (max 90 secs).
24
Registration
on the base unit until
j
to REGISTER. Press
-
. Previously registered base numbers will fl ash.
1
4
/
/
/
/
starts fl ashing. Registration
starts fl ashing. Registration
y
y Q
y
Q
Q
Q
.
0
0
0
.
0
0
0
www.doro.com