Alternate Network Routing (Lcr) - Doro 565 COLOUR Manual

English
Basic settings

Alternate Network Routing (LCR)

This function will automatically select the telephone network operator of your
choice. The telephone can be set up to add digits to and/or replace certain digits
in telephone numbers.
To choose a certain network operator, you would normally dial a prefix code
before the actual phone number.
If you have chosen a different operator for international calls, to use their
service you must dial a prefix code before the telephone number, for example
9301. You can program the LCR function to insert the prefix code before
the international access digits 00. For example: 0046 46 2805000 would
automatically be dialled as 930100 46 46 2805000
Please note!
In order to place your call with a certain network operator you must be a registered subscriber.
Only one Alternate Network Routing (LCR) setting can be active at a time.
Setting up an LCR number
1. Press Menu.
∧ ∨
2. Scroll to Base Settings using . Press Select.
/
∧ ∨
3. Scroll to LCR using / . Press Ok.
4. Enter the base unit PIN code (0000 by default). Press Ok.
5. Enter the dialling code to be replaced (up to three digits, e. g. 00). Press Ok.
6. Enter the new number to be added (up to eleven digits, e.g. 930100). Press
Ok to confirm.
Automatic network prefix using LCR
If the dialling code to be replaced is left empty the telephone will dial all
numbers with the added LCR prefix. This feature is useful when the telephone
is connected to a PBX where an access number is required.
28 www.doro.com