Table of Contents
Advertisement
English
Only for models with an extra handset (+1...):
9. Connect the mains adapter to an electrical wall socket, and to the socket on
the charger.
10. Carefully remove the handset battery cover. Insert the batteries into the
handset ensuring correct battery polarity is observed, and replace the battery
cover.
11. Place the handset in the charger unit, with the keypad facing outwards.
Once the handset is correctly positioned in the base unit, a beep will be
heard.
12. Leave the handset to charge initially for 24 hours before use.
Important note!
Use an original adapter only (9VAC)!
Under power failure conditions the telephone will not operate. Please ensure that a separate
telephone not dependant on local power is available for emergency use. The earpiece of the
handset may attract small ferromagnetic objects such as staples or pins, care should be taken
when placing the handset near these items. Do not place the base unit close to other electrical
equipment such as TV sets, computer screens, telecom equipment, fans, etc. This will minimise
the risk of interference. Do not place the base unit in areas where it will be exposed to direct
sunlight or other major heat sources! In order to conserve battery power, the display is very dark
in standby mode.
If you wish to illuminate the display press any button on the handset, e.g.
8
Installation
∧
.
www.doro.com
Advertisement
Table of Contents
