Belt Clips; Battery - Doro DECT 160 User Manual

English
Installation

Belt Clips

A belt clip is included, which can be fitted on the back of the handset. To attach
the clip, align the two edges with the indents on either side of the handset and
press firmly into place.

Battery

The telephone comes supplied with an environmentally friendly nickel metal
hydride (NiMH) battery. As with all batteries performance may degrade over
time, should you notice that the standby time has reduced considerably or there
are signs of leakage, the battery pack should be replaced.
A fully charged battery will last for approx. 5 days in standby or approx. 8 hours
talk time. These operation times apply at normal room temperature.
Recharging of a run-down battery takes about 14 hours.
Please note that the battery charge indicator in the handset display flashes while
charging and will stop when the battery is fully charged.
The base unit has an automatic charging mechanism that prevents the battery
from being overcharged or damaged due to prolonged charging.
Please note!
When the telephone is installed for the first time, the battery must be charged for 14 hours
before using the telephone.
Use only DORO original batteries. The guarantee does not cover any damage caused by
incorrect batteries.
The handset is charged with the buttons facing upward.
6 www.doro.com
DECT160-360_20010530.indd 6-7 2001-05-30, 11:29