Caller Id - Doro DECT 160 User Manual

Explanation of Caller ID
Caller ID allows you to see who is calling before you answer a call, see who has
called in your absence and see who is calling while you are on a call.
Type 1 - When Caller ID is enabled on your telephone line, your telephone will
ring. Between the first and second ring, the display will show the callers number
or the name (if the name is stored in the phone book).
Type 11 - While on the telephone and you receive another call you will hear a
short burst of data (noise) and the call waiting tone. Following this you can view
the caller's number/name on the display.
New calls are indicated in standby mode by a flashing
indicator is turned off when all numbers are erased. Up to 30 incoming calls can
be stored in the call log including the date and time. When the log is full, the
oldest number will be deleted automatically.
Please note!
In order for numbers to be shown, the Caller ID service must be provided by your network
operator and a current subscription in place. Contact your operator for more information.
Retrieving and Dialling Incoming Numbers.
1. Press . The display will indicate the number of new calls as well as the
5
total number stored.
2. Scroll to preferred entry. If the same number has called more than once
then this is indicated by a >. Press
calls were made.
3. Press
Q
www.doro.com
DECT160-360_20010530.indd
Caller Identication
to dial the number or MENU to return to standby mode.
14-15
in the display. This
5
in order to see how many repeat
2001-05-30, 11:29
English
15